Easynet Pro DNS Issue

[arongooch]

Hi everyone, first time posting on a forum. Go easy until I learn all the rules and regulations

I have an Amiga 600 with an ACA620 and PCMCIA WPA2 WiFi card which supports Prism2.device. I have successfully got Miami running and connecting to the net. With a bit more playing around and manually editing scripts etc I also got AmiTCP 3.0 to work successfully.

I am currently having great difficulties with Easynet Pro however. I can get the program to go online and am successful with pinging Googles IP address of 8.8.8.8 but DNS appears not to be working at all from either the ping command, Aweb or IBrowse.

I am using static IP addresses for all settings according to my networks setup. I have two DNS IP addresses which I got from my modem/router and entered them manually like I did in AmiTCP3.0 but it still will not work on Easynet.

I have been looking up endlessly on forum after forum for last couple of days but nothing I looked at seems to be applicable or works with my issue. Any help would be great appreciated.

[arongooch]

I guess because I bought it and it looked like recently updated software.

Can't get a registered version of Miami any more and keeps disconnecting every 30 mins. Also doesn't remember my static IP address' etc. Shame because I really like Miami. It even feels a fair bit quicker than Easynet.

AmiTCP3.0 works but Amiga Explorer and SMBFS don't seem to support it.

Never tried Roadshow. If that's free then I might give it a go.

[arongooch]

I appreciate all the alternatives and at this stage I am certainly committed to getting Easynet to work correctly. If worse comes to worse I will more than likely take a look at Roadshow.

Thanks for the reply and welcoming amigakit. I have opened a ticket through your website a couple days a go. Is it ok to put the "EasyNet.settings" report in the ticket? or when you say Pmail do you have a particular email address to send the report too?

[arongooch]

Hi everyone and Amigakit,

I am happy to report all is working correctly now. There is a settings under "projects" then "TCP/IP Settings" that selects "Primary/secondary & tertiary" DNS. This by default is set to "Off". Makes perfect sense now and Easynet works quite satisfactory. I did initially notice the line "** WARNING: NO DNS IN USE **" but didn't know what was causing it. Thanks for the help Amigakit.