a4000 csppc EXCEPTION ERROR ON RAMLIB_PPC WHEN OPENS WARD3D APSS!!!HELP!!! PROBLEM SOLVED!!

[tolishot]

hi!i have a problem with my csppc !when i call warp3d apps then shows a message :
powerpc data access exception
task name 'ramlib_ppc'
task address:087ed3b0
task id:105


that message shows!i have install fresh setup about 3-4 times!
my software is:
os3.9
bb1
bb2
libs latest
powerpc support from cd
warpup5.1update
warp3d4.2a
cgx4.2r6
thats all!
someone to knows why shows this message??
my hardware is working fine with os4!
and before my hard diskgoing to dead the mashine works the warp3d apps very fine!demos3d and games 3d!after the next day when my hard disk crash i istall new hard drive and i put all this common software to say in upper lines!help me please!!!!thanks!
 :boohoo:  :boohoo:

[tolishot]

when i buy the csppc card the germany seller mail me the libs and driver for installation csppc.after installation the csppc works great!!both demos 3d and games like wipeout quake heretic and others.the same problem i have also and my amiga 1200ppc.in last week when i install some libs ppc and 3d works!but i dont change the setting in prefs/workbench graphics memory or other memory option.default option is graphics memory and when i try to change it to other memory show a message env/sys cannot be delete !!(a1200ppc message).

help me to correct this problem with exceptions!!if i correct
 this in my a4000 then i try to correct also and my a1200!!
thanks!!! :-?

[tolishot]

thanks for reply!i want to tell me the steps of this procedure to fix the problem!what to do? :-?

[tolishot]

he works this patch in this situation???

[tolishot]

warp3d and warpos works toghether??

[tolishot]

thanks for advise!i try to run the stuckaid and i tell you what happens! :idea:

[tolishot]

when i run the stackaid both iprefpatch  and ramlibpatch show crash message 87000004!!
anyone help!!! :boohoo:  :boohoo:  :pissed:

[tolishot]

this exceptions shows when the ppc cpu is ded??
if is ded why the warpos demos working fine?
and why the os4 working on ppc correctly?ideas???

[tolishot]

i hope to fix this library!
the waitstates is disable from menu!i have select the 60ns setting.i try and the 70ns.but the same.before this message my a4000 works fine.i am stupid because my amiga works great to all progs.and then i install some other libs ppc and then...
the end.my hard disk broken and i put another one hard disk.install os3.9 bb1..bla bla and after all ward3d refuse to play!!thats all!i hope to play!!thanks!in few houres i tell you if play my amigi!! :getmad:  :getmad:

[tolishot]

tell me how to install morphos on my amiga?details thanks!

[tolishot]

and drivers?cvppc? libs ppc and others?

[tolishot]

i have the same problem!!download from aminet the stackaid tool.run it and tell us what to do to your mashine! :getmad:

[tolishot]

reseating the ppc card?why?i dont have any of this problems!anyway the os4 working fine!if the csppc card exist this problem the os4 cannot run!i hope to be the libs problem!not hardware!the other solution is to install morphos os! :-?

[tolishot]

you have broken your csppc?in my condition the problem shows after crash my hard disk!after that i dont know what happens  the software never works like the last installation on the broken hard disk!!i try today to fix the broken disk and if the works after i will copy this disk in another new.then i hope to see what libs i put it there and the differense on the new installation.the new installation shows the exception error!in the broken disk never shows that!!i am confused about that!i must to find the mistake!and then i post with big letters I FOUNDED!!!!!  :-D

[tolishot]

take care for the csppc!!it is very sensitive device!in my case i will put out the 68060/50 and put another one 68060/66.
crystal and other working fine.in cvppc i put in all chips metall cooling from zalman or other..!