Welcome, Guest. Please login or register.

Author Topic: RocTec RocHard harddrive  (Read 4755 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline koNik

  • Newbie
  • *
  • Join Date: Feb 2004
  • Posts: 11
    • Show all replies
    • http://clublada.of.pl
Re: RocTec RocHard harddrive
« on: February 03, 2004, 11:20:25 PM »
Hello !

Can anybody scan an orginal manual for this controller and send it to me ?
And can anybody make an image of orginal software disk(s) and send it to me too !?

Please help if You can :-( !
A1200 KS 3.0 Apollo 68040/Elbox 1230 LC 68030[40Mhz]/Elbox 1200/0-8 8 MB RAM
A500 KS 2.0 Roctec Rochard RH-800C/MacroSystem Evolution M500/C= A590
A600 KS 1.3/3.0
Commodore CDTV
 

Offline koNik

  • Newbie
  • *
  • Join Date: Feb 2004
  • Posts: 11
    • Show all replies
    • http://clublada.of.pl
Re: RocTec RocHard harddrive
« Reply #1 on: February 04, 2004, 08:56:04 AM »
Yeah it works !!!
Thanks for the driver melott - the disk which was on amiga-hardware was damaged and uncomplete !!!
But I still have a problem - the hard disk is working but it do not boot (I have formated and put the system on it by installer). And the worst thing is that the hdd is seen only when boot from installer disk !
When I boot from WB 2.1 Install I can't see any partition !
What could be wrong ?
I'm using SCSI HDD and KS 2.0 v37.300 :)
A1200 KS 3.0 Apollo 68040/Elbox 1230 LC 68030[40Mhz]/Elbox 1200/0-8 8 MB RAM
A500 KS 2.0 Roctec Rochard RH-800C/MacroSystem Evolution M500/C= A590
A600 KS 1.3/3.0
Commodore CDTV
 

Offline koNik

  • Newbie
  • *
  • Join Date: Feb 2004
  • Posts: 11
    • Show all replies
    • http://clublada.of.pl
Re: RocTec RocHard harddrive
« Reply #2 on: February 04, 2004, 01:55:38 PM »
but I hope that normal IDE CD-ROM should work ???
A1200 KS 3.0 Apollo 68040/Elbox 1230 LC 68030[40Mhz]/Elbox 1200/0-8 8 MB RAM
A500 KS 2.0 Roctec Rochard RH-800C/MacroSystem Evolution M500/C= A590
A600 KS 1.3/3.0
Commodore CDTV