A1200 / A600 keyboard ZIF connector

[FrenchShark]

Hello,

I am trying to find a ZIF connector where I can plug an A600 or A1200 keyboard.
I know the A600's is 30-pin and the A1200's is 31-pin.
The pitch seems to be 1.25mm (I have a Micronik Key6620 board and if I put a standard 0.1" IDC connector next to the ZIF connector, I can see that it does not align perfectly, so it should be 1.25mm and not 1.27mm).
Amphenol has the G27 serie that looks very close to what is in the Amiga (http://www.amphenol.co.za/CatPages/FFC.pdf).
Unfortunately, it is 30-pin max, just good for the A600.

Any idea ?

EDIT : I just found the one used by Micronik adapter:
http://www.allproducts.com/ee/joint-1/06-car_connector.html
or on Amiga : :-?
http://www.allproducts.com/ee/joint-1/05-car_connector.html

I found the connector 52045-3145 or 0039532314 from Molex, 31 pins !! :banana: :banana: :banana:

Regards,

Frederic

[FrenchShark]

Hello,

The 31-pin connector is impossible to find.
Here are the Molex part number :
0039532314 : 31-pin, right-angle ZIF
0039532315 : 31-pin, straight ZIF
0520443145 : 31-pin, right-angle, non-ZIF
0520453145 : 31-pin, straight, non-ZIF
But, the distributors have only 30 or 32-pin connectors.

Regards,

Frederic