DCE Flicker Magic Scan Doubler Problem :(

[djbase]

BVision is a graphic card, no scandoubler or flickerfixer. It will work with your TFT but cannot display pal screens for old games.

[djbase]

Yes, you can also use some kind of switch box.

[djbase]

1) can this be used in an original A1200 desktop case or is it designed for use in towerised Miggy's?

Works in Desktop case.

2) since it fits over Lisa, can we assume the new and improved VGA signal still runs through the A1200's video port? Or is there a cable and adapter you are supposed to sneak out through the extra port by the controllers?

Was there ever a scandoubler that outputs the signals through the original RGB port? The new Indivision has extra headers for the VGA port connected by cable.

[djbase]

Not that I'm aware of, but since I did not see the header and cable, thought I'd ask to be sure. It does look as if there are the standard VGA out pins to the right of the board though - but again, did not want to assume. Thanks for the info!!

If you check the news article you will find an image of the Indivision AGA mounted into an A1200. There you can see the headers and cable on the right.

http://www.siliconsonic.de/news/Indivision_AGA_mounted.jpg

[djbase]

You may need svideo then ;-)

http://www.amiga.org/gallery/photo.php?lid=3908&cid=5

[djbase]

It's possible with some extra logic, yes.

[djbase]

I doubt that.

[djbase]

Does your S-Video adapter also work on 4000s? If so could you sell me one?

No, the 4000D does not have the requiered chip.

[djbase]

The RGB port has no SVideo signal. You have to convert the RGB signals first.

[djbase]

You would have to modify your hardware for that but this makes troubles with some PAL games.

The line are normal for this kind of scandoubler because the running mode is not 100% compatible with your TFT.