cybervison 64/3D scandoubler in A3K

[SnkBitten]

if i can, i'll test it in a 4000.
but i don't really understand the phase 5 choice too... as the CV64/3D is zorro 2 compatible. they really could have make it compatible with 2/3000 too.

for the moment, my experience is very good. this SD can provide a very clean and sharp picture with good color level. as good as the internal A3000 SD/FF.

I have a CV64/3d + Scandoubler in my A4000T if there is something you can suggest for testing.  I can't recall any washed out screens or other irregularities with normal use, though most things I do are RTG workbench and NTSC VideoToaster related.

[SnkBitten]

In your system, does the scandoubler work with AGA screenmodes?

Forgive my ignorance but what constitutes an AGA screenmode? 32-64-128-256 color modes?

The Scandoubler doubles the 15k native modes so I don't expect it to do anything to the DblNTSC modes.

256 color screenmodes (NTSC Hi-res or NTSC Lo-res)??   Those are fine and look great.  Interlaced modes work but are still interlaced (no Flicker Fixer in the CV64/3d+SD).  Tried 32 and 256 color modes, they look great.

[SnkBitten]

Here's my workbench in 256 color, NTSC:Hi-res Laced screenmode, A4000T with Cybervision 64/3D + Scandoubler.

[ATTACH]5605[/ATTACH]

[SnkBitten]

I tried AGA Test which seemed to run fine with no noticeable graphic issues or missing colors, but it ran a cycle of each primary RGB.
http://aminet.net/package/dev/c/aga-test

Next was Mr Copper.  
http://aminet.net/package/game/gag/mrcopper
[ATTACH]5606[/ATTACH]
640x200 256color workbench screenmode with Mr Copper running.

But if I want high color I'm going to lean towards using the Cybervision64/3D.

[SnkBitten]

Can you try it with this?

http://m68k.aminet.net/package/util/wb/Copper-Demon

Here's two shots using two different Presets...
[ATTACH]5608[/ATTACH]
[ATTACH]5607[/ATTACH]