Welcome, Guest. Please login or register.

Author Topic: Problems with booting from A3000 native scsi with Cyberstorm PPC  (Read 3217 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Noster

  • Sr. Member
  • ****
  • Join Date: Jan 2004
  • Posts: 375
    • Show all replies
Hi

> I made sure I do not have the SCSIPATCH set in the CSPPC flashrom.

Is this the patch/switch from the Cyberstorm Early-boot menu that disables the motherboards SCSI-controller to speed up booting ?
I think, I remember that there was such a switch, that disables the motherboards SCSI-controller so this SCSI-bus is not scanned during startup to increase the booting speed. Check out your early-boot menus settings.

Noster
DON\\\'T PANIC
    Douglas Adams - Hitch Hiker\\\'s Guide to the Galaxis
 

Offline Noster

  • Sr. Member
  • ****
  • Join Date: Jan 2004
  • Posts: 375
    • Show all replies
Re: Problems with booting from A3000 native scsi with Cyberstorm PPC
« Reply #1 on: June 23, 2004, 08:26:37 PM »
Hi

> I can not get the Startup menu to appear while holding both mouse button

If I remember right, you have to press the Escape-key [ESC] during startup to enter the early-boot menu of the Cyberstorm.
If you have a graphics card, you have to connect a monitor at the native Amiga video output for the early-boot menu. The AmigaOS early-boot menu is entered via pressing the left mouse-button during system start. If you use a PC-mouse and an adaptor like Topolino, this might fail, use an original Amiga-mouse for this purpose.

Noster
DON\\\'T PANIC
    Douglas Adams - Hitch Hiker\\\'s Guide to the Galaxis