A1000 CF<>IDE & DJbase KS adapter install and no worky now :-(

[Jeff]

I have one in my A1000 and it works great.  I used a CF adapter mounted on the back of the case because mine is the first revision and doesn't have the CF socket. I am also using DJBases Kickstart adapter with an A500/2000 3.1 ROM. There are pictures of it in my photo gallery on this site if you can find them.

[Jeff]

I made a small PCB to move the 68K socket over a little bit because I was having fitment problems also with one of the combinations I tried. There should be pictures of that too.  Good Luck!  Too bad the MRMKL doesn't work with my M-Tec 020 board:-(.  There is a FFV jammed in mine too.

Have Fun!