I was gathering this together from a variety of sources years ago and it still happened to be laying on my desktop. Please help me complete it and verify it is correct before using it.
I DO have the factory service manual also if I can be of any other help let me know. BTW I have not cross checked this with the service manual yet (I have to find it :-)). I will correct any mistakes if I find them.
I did hack this together with a PC AT supply about a year ago to test a motherboard I bought on eBay from KarmannSS (SP?). The motherboard was destroyed by a previous repair attempt when I got it so it didn't work. However it didn't smoke anything!!
Thanks,
Jeff
+---------+--------+
|-red------|-red-----| +5V (red) ...... 30A (23A)
|-red------|-red-----|
|-red------|-red-----|
|-red------|-red-----|
|-black---|-black--| GND (black)
|-black---|-black--|
|-black---|-black--| +5V (red) ...... 0.75A (.5A)
|-black---|-black--| +5V (red) ...... 0.75A (.5A)
|-black---|-red-----| -5V (white) ...... 0.3A (.5A)
|-white---|-yellow-| +12V (yell) ...... 10A ( 9A)
|-blue----|-yellow-| -12V (blue) ...... 0.4A (.5A)
|-1-*------|-orange-| P.G. (orange)
+---------+--------+
*(C.L. is NOT generated by PC-PSU, isn't)
(needed anyway, when setting Jumper 35 to)
("Vsync"...)
AT P8 P9
1 Orange Power Good
2 Red +5V DC
3 Yellow +12V DC
4 Blue -12V DC
5 Black Ground
6 Black Ground
7 Black Ground
8 Black Ground
9 White -5V DC
10 Red +5V DC
11 Red +5V DC
12 Red +5V DC
