Welcome, Guest. Please login or register.

Author Topic: Need DB25 (male) to SCSI/II 50-pin (internal, male) adapter...  (Read 1830 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline blakespotTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 880
  • Country: us
  • Thanked: 8 times
  • Gender: Male
  • Visit ByteCellar.com
    • Show all replies
    • ByteCellar - The Vintage Computing Blog
Need DB25 (male) to SCSI/II 50-pin (internal, male) adapter...
« on: January 02, 2004, 06:26:20 PM »
I need a SCSI adapter with a DB25 male connector on one end and a standard SCSI I/II 50-pin, internal, male connector on the other to use to interface the Blizzard SCSI Kit's SCSI cable with the rest of the inside of a tower.  I bought one of these that had a nice screw hole to be mounted inside a case a while ago from a MicroCenter locally here, but they no longer carry much SCSI I/II stuff.  

Where can I order this adapter?  Thanks.


blakespot
:: ByteCellar.com - The Vintage Computing Weblog
:: Amigas: 1000, 2000 '020, SAM440ep-Flex
 

Offline blakespotTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 880
  • Country: us
  • Thanked: 8 times
  • Gender: Male
  • Visit ByteCellar.com
    • Show all replies
    • ByteCellar - The Vintage Computing Blog
Re: Need DB25 (male) to SCSI/II 50-pin (internal, male) adapter...
« Reply #1 on: January 02, 2004, 08:04:31 PM »
SCSISource, MicroCenter, and Redmond Cable all do not carry this adapter.  I did purchase this very adapter from a local MicroCenter 3 years ago.  I went back and they did not have this one, though they have many SCSI adapters.

It _is_ an odd adapter - I can't imagine a scenario other than someone with a towered A1200 with a CPU-board-based SCSI adapter needing this adapter - a small crowd, relatively speaking...

Any other ideas?



blakespot
:: ByteCellar.com - The Vintage Computing Weblog
:: Amigas: 1000, 2000 '020, SAM440ep-Flex