Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: mouse adapter ps2m, PIC16F627A  (Read 2317 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show all replies
mouse adapter ps2m, PIC16F627A
« on: July 20, 2009, 08:02:35 AM »
looking at this page: http://www.students.tut.fi/~leinone3/ps2mhiiri627/
I don't see download link for .hex file used to program PIC16F627A.

still, it says that one should use the same firmware from ps2m on aminet.
does it mean it could use directly "ps2m_5button.hex" or it needs 'recompiling' the "ps2m.asm"?
Logged
“Giving up is always an option, but not always a failure.”
 

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show all replies
Re: mouse adapter ps2m, PIC16F627A
« Reply #1 on: July 22, 2009, 08:02:18 AM »
has anyone used Willem to program the  PIC16F627A?
I cannot get the 'config word=#154' as in instructions, tried all combinations of switches :/
Logged
“Giving up is always an option, but not always a failure.”
 

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show all replies
Re: mouse adapter ps2m, PIC16F627A
« Reply #2 on: July 28, 2009, 06:20:56 PM »
I managed to find the right combination, by reading the specifications, here it is in case someone needs it: http://www.fileden.com/files/2007/6/28/1218776/Amiga/cfgwrd.png
it seems to work :)

but I still have few questions; is C1=100nF? and JP1 header with 10pins is for joystick pass-through presumably?
Logged
“Giving up is always an option, but not always a failure.”
 
Pages: [1]   Go Up
« previous next »