Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Which is better, BVision PPC or Voodoo3 ?  (Read 5477 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show all replies
Re: Which is better, BVision PPC or Voodoo3 ?
« on: September 14, 2008, 08:19:36 PM »
um, and how do you improve insulation Piru? by cutting down some wires?


@cv643d
is 9 wires enough?
maybe its better to butcher some old monitor cable..
Logged
“Giving up is always an option, but not always a failure.”
 

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show all replies
Re: Which is better, BVision PPC or Voodoo3 ?
« Reply #1 on: September 14, 2008, 09:36:25 PM »
oh, I see now, Piru. thanks for the tip.

@cv643d
but twisted pair is used for different frequencies. It would probably be better to use some specialized video cable like factory made SCART2SCART.
Logged
“Giving up is always an option, but not always a failure.”
 

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show all replies
Re: Which is better, BVision PPC or Voodoo3 ?
« Reply #2 on: September 16, 2008, 04:45:46 PM »
maybe one of them is SCSI chip. and I believe there is one tiny chip/component below the PPC heatsink, in the corner. some say that you should put thermal paste on it so that heatsink cools it better, too.
Logged
“Giving up is always an option, but not always a failure.”
 

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show all replies
Re: Which is better, BVision PPC or Voodoo3 ?
« Reply #3 on: September 16, 2008, 09:00:16 PM »
there is a similar thread with nice photos on amigaworld (sorry if breaking rules)

I remember seeing BPPC with yellow heatsinks on those tiny chips somewhere (probably here) but cannot find the damn link.
Logged
“Giving up is always an option, but not always a failure.”
 
Pages: [1]   Go Up
« previous next »