Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A2000 mouse port dead  (Read 4701 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show all replies
Re: A2000 mouse port dead
« on: May 28, 2007, 04:54:52 PM »
if you're lucky it could be the fuse (IIRC)
also check the voltage
Logged
“Giving up is always an option, but not always a failure.”
 

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show all replies
Re: A2000 mouse port dead
« Reply #1 on: May 28, 2007, 07:56:52 PM »
It is called "picofuse" the same one is used for voltage on video out and other connectors. unfortunately it costs a lot more than ordinary fuse.
I was surprised to see its rated at 4A (IIRC), seems a bit too high..


Logged
“Giving up is always an option, but not always a failure.”
 

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show all replies
Re: A2000 mouse port dead
« Reply #2 on: June 20, 2007, 11:53:22 PM »
no, the fuseholder won't fit..

have a look here for my temporary 'solution'
(photo)
Logged
“Giving up is always an option, but not always a failure.”
 

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show all replies
Re: A2000 mouse port dead
« Reply #3 on: June 25, 2007, 06:17:07 PM »
Quote
What rating fuses did you use?


4A

it should be the same as the original picofuse, but it does seem rather large, at 12V that would be like 48W or so.. :inquisitive:
its not that hard to find picofuses, but they are very expensive compared to standard ones..
Logged
“Giving up is always an option, but not always a failure.”
 
Pages: [1]   Go Up
« previous next »