Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: PC Floppy on amiga 1200?  (Read 3720 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
Re: PC Floppy on amiga 1200?
« on: March 25, 2007, 06:57:27 PM »
yes, you can have a look at aminet hard/hack and past posts. You need to switch some wires on cable and add a diode. If its ESCOM by any chance, connecting PC floppy should be even simpler.
Logged
Better sorry than worry.
 

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
Re: PC Floppy on amiga 1200?
« Reply #1 on: March 26, 2007, 10:18:25 PM »
this onecould help, too.
I think you need to connect cathode to Select0 and anode to RDY on Amiga side.
you also need to cross dischange wire. just look at pinouts on  hwb
BTW, its PCs fault these hacks are needed, because those floppies don't comply with Shugart standard.
Logged
Better sorry than worry.
 

Offline orange

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
Re: PC Floppy on amiga 1200?
« Reply #2 on: April 05, 2007, 04:45:31 PM »
Here  are the instructions.
You could also connect cathode to /MOTEB (/MTRON) that works too, but this seems better solution in case you got other drives. Someone, please verify..

Detailed information is here
Logged
Better sorry than worry.
 
Pages: [1]   Go Up
« previous next »