Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Help needed  (Read 3438 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline maximoTopic starter

  • Newbie
  • *
  • Join Date: Dec 2003
  • Posts: 19
    • Show all replies
    • http://www.mycyberspace.co.uk
Help needed
« on: December 05, 2003, 07:41:15 PM »
System : a1200
Expansion : Zorro / Apollo 1260 / 66

Problem : I have a CV64/3D Card which does not display anything at all. There doesn't seem to be a power signal going ot the monitor. However I can view the hardware details from the OS when my monitor is plugged into the standard video. Does anyone have any ideas that could help?
Logged
 

Offline maximoTopic starter

  • Newbie
  • *
  • Join Date: Dec 2003
  • Posts: 19
    • Show all replies
    • http://www.mycyberspace.co.uk
Re: Help needed
« Reply #1 on: December 08, 2003, 11:13:01 AM »
Ok then let me add further to my problem. The card is one made by DCE, it's NOT plugged into one of the Fast Z2 slots on the busboard. I have install the software that came with the card. Hopefully I've saved a screenmode that the card can display.  Shouldn't the card be sending a monitor on feed once the Amiga is powered up? Or does the card need to be driven before it send's out a signal to the monitor?

Anyone got a spec. simular to me out there?
Logged
 

Offline maximoTopic starter

  • Newbie
  • *
  • Join Date: Dec 2003
  • Posts: 19
    • Show all replies
    • http://www.mycyberspace.co.uk
Re: Help needed
« Reply #2 on: December 09, 2003, 11:51:38 AM »
Thanks to everyone for the advise, will have a go tonight hopefully. I may well rebuild the system as I've got a number of hacks installed, they may be causing me problems. Nothing better than starting from scratch is there now.
Logged
 

Offline maximoTopic starter

  • Newbie
  • *
  • Join Date: Dec 2003
  • Posts: 19
    • Show all replies
    • http://www.mycyberspace.co.uk
Re: Help needed
« Reply #3 on: December 10, 2003, 08:03:58 AM »
Well I rebuilt the system last night, just the OS and installed the CV64/3D software. Selected a screen mode from the prefs and rebooted. This get nothing from the card?

Is there anything I need to do to the jumpers on the bus board, I take it I don't need the video slot enabler or do I?
Logged
 

Offline maximoTopic starter

  • Newbie
  • *
  • Join Date: Dec 2003
  • Posts: 19
    • Show all replies
    • http://www.mycyberspace.co.uk
Re: Help needed
« Reply #4 on: December 12, 2003, 10:43:30 AM »
Still playing with my problem. Tried using the software on the OS3.5 CD and got my monitor to power up last night. So I think I'm getting closer having a working CV64/3D, does anyone have a working Monitor file that I could try out?

Also found that installing the software break my CD-ROM driver, has anyone had this before?
Logged
 

Offline maximoTopic starter

  • Newbie
  • *
  • Join Date: Dec 2003
  • Posts: 19
    • Show all replies
    • http://www.mycyberspace.co.uk
Re: Help needed
« Reply #5 on: December 16, 2003, 02:04:12 PM »
Problem sorted out. I found the VESA settings for the modes. I now have a fully working CV64/3D using Picasso96.
Logged
 
Pages: [1]   Go Up
« previous next »