scala mm400 dont exit!!!

[ChaosLord]

1. Are you running scala on your AGA chipset or your gfx card?

2. Never ever use Cybergraphx v3.  It is totally bugridden.

[ChaosLord]

@Jack

SCALA MM400 is an AmigaOS program.  I am afraid it wasn't really designed with CybergraphxOS in mind.

You can guaranteed run SCALA on your hardware if you remove the cgfx driver from DEVS:Monitors/
Just put it somewhere else so you can bring it back later if you want.

That is what I have done a zillion times in order to run normal Amiga AGA software.  It will work.

There may be other ways of making it work but I donno...

[ChaosLord]

Ahhh yes I remember the other trick now!

There is a terrible bug in all versions of Picasso96OS and CybergrafxOS that I have ever tested.  You can't reliably run AmigaOS software that opens an AmigaOS screen while any P96 or CGX screen is already open.

You can change your workbench to an AGA mode then run SCALA and it might work.

Make sure you have no CGX screens open for this trick to work.  No web browser, no text editor, etc.

[ChaosLord]

If you are using the same Amiga that you used last time then wouldn't all the settings already be set correctly?