A1200, OS 3.9, cnet.device... and no hope left

[HopperJF]

maybe its a dodgy card?  :-?

[HopperJF]

if it works fine on your laptop then there might be an issue with the pins in your PCMCIA slot
get a torch and try and see if none of them are bent

a lot of A600s and A1200s started suffering from bent pins, especially after the advent of the squirrel and other pcmcia products

[HopperJF]

Mikko_PKP wrote:
Tested: card works fine on Windows XP.

have you had a look at the pins in your pcmcia slot (on the amiga)

[HopperJF]

Mikko_PKP wrote:
Checked the PCMCIA port, no bent pins.

have you tried getting a vacuum cleaner, or blowing in it
there might just be lots of dust getting in the way..

[HopperJF]

Gerbinist wrote:
@ Mikko_PKP

I saw you mentioning CardPatch too. CardReset is the only thing you need. Maybe something conflicts when you try running both the patches.

@ amiga1260

Get CardReset from Aminet ;-) It fixes exactly what your are experiencing atm.

he's tried that, and it only improved things, but not completely erradicating the problem

[HopperJF]

Mikko_PKP wrote:
OK, the CardReset installation told me to install both... I'll try to remove CP now.

ok, good luck  :-)