Getting PegII to boot from CD

[CLS2086]

Yes, you'll see raw data list at 115200 bauds.
I've also a Pegasos2.
Are you sure you have well the MorphOS 1.4.5  (while booting you can see its label MORPHOS) ?
Do you have 1 or 2 Ram ? Use 1.
Try to boot with the Voodoo on the 1st PCI slot and nothing else on the other slots. Don't plug anything on the USB port !!!
Put your HDD alone on the primary IDE channel as master or slave (some brands don't like to be use in Master mode or with a CDROM)..


But :
Are you sure your HDD is really empty ?
Maybe you should try to get a Peg2 Debian and use its installer to clean the content.  :rtfm:

[CLS2086]

Try also to explore your CDROM and disk by using the ls command :

ls /pci/ide/cdrom
or ls cd

ls /pci/ide/disk0@1

clean your eeprom too

the right boot.img for peg2 is boot.img , the other one is for Peg1.

[CLS2086]

Hi,
yes for sure on a private FTP. But first you have to register for free.
Information on morphzone.org or directly on their dedicated IRC channel.

[CLS2086]

Hi,
sorry that I forgot to tell you about that, some new CD/DVD drives are not 100% compatible with AMIGA and Pegasos...
For exemple I can't use a Samsung CDRW 52-32-52x on my A1200 even with IDEFix Express...