Welcome, Guest. Please login or register.

Author Topic: A520 RGB adapter  (Read 2783 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline WarPiperTopic starter

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 369
    • Show all replies
A520 RGB adapter
« on: June 03, 2003, 07:53:46 AM »
Hi,

I have sold my A4000, and now I am back to my old A500 (never thought I would ever fire it up again) but I have a A520 adapter connected to it so I can connect it to the tv through the video in rca connecters on the television,  I have just one question as I have neer used the A520 befor,

Q:  After pluging the A520 into the RGB port of the amiga, then connecting the RCA cable to the video out on the A520, and pluging the other end of the RCA connector into the video in on the tv, AM I SUPPOSE TO GET A COLOR PICTURE?
There was a time I can remember computers were fun...I miss my A1200.
 

Offline WarPiperTopic starter

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 369
    • Show all replies
Re: A520 RGB adapter
« Reply #1 on: June 03, 2003, 08:36:30 AM »
Hagar,

ok the connector to the RF out is RCA type, the connector for the antenna in on my tv is a Coax type, what do I use to make a connection?
There was a time I can remember computers were fun...I miss my A1200.
 

Offline WarPiperTopic starter

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 369
    • Show all replies
Re: A520 RGB adapter
« Reply #2 on: June 03, 2003, 08:54:44 AM »
@JurassicCampe

my 500 is NTSC and the kickstart (insert disk animation) comes up all in black and white and when I boot from the hard drive, its still in b/w,

I dont know what type of wire runs from the RF out to the composit in on the tv, also why would the video out connection be in black and white?
There was a time I can remember computers were fun...I miss my A1200.