Amiga 1200 case (Stainless, brushed steel)

[Shamron]

Hi everyone!

If anyone are interested, i'm making Amiga 1200 cases in Stainless, brushed steel on request. Your logo or name can also be cut out. On my personal case, (which you can se on picture below) i have 3 blue led's  making my logo blue and "shiny" in the dark :-)

For a picture, look here:

ShowOff Media

Feel free to contact me with questions, etc. Email adress is: "post AT showoffmedia DOT no"

[Shamron]

Hi there.

The case is cut with industry laser, so there is no "steel debris" to cut your fingers on :-)

It's important that you understand that my company "ShowOff Media" doesn't usually produce these cases, but i needed one myself, and i have had some requests by other people who wanted one, so i decided to make them available for those who want one. The only "guarantee" i give on this product, is that your motherboard will fit.

I have soldered on 2 blue leds to where the original leds used to be (Power and HD), and it all works nice. I have also soldered 3 blue leds behind the cut-out logo, so it glows blue in the dark.

The case doesn't support internal floppy, external through the external floppy port only. All the ports on the backside plus pcmcia ar available from the outside. If you want to upgrade ram, change accelerator, etc. You'll have to open the case (You just slide the top cover off)

Sorry for my poor English.

I guess pictures says more than words, so i will upload more. look for a new button on my homepage in a couple of days. Sorry for only Norwegian site, but i'll make the "ShowBox"-page in English :-)

http://www.showoffmedia.no

And yes, i think i can make them in chrome, for a little higher cost :-)

[Shamron]

Slot for cd-rom will be fixed, but then you probably want room for both a harddrive 3,5" and a small psu?