Hi Amiganew,
Amiganew wrote:
Oh, I think I found it.
That is really the original /OE Signal from Board at the socket because in the pickture Flash A500 you can see Three at Carry meaning 19 20 and wr in schematics.
So I need only the signal of Pin 1 or Pin 31 Kickstart at 6a a500 Board
I've just uploaded a pic showing (more clearly) the connections to the Gary chip, for the three IC hooks.
Hopefully it will show up soon for you to see.
If you have a jumper on your Kickstart chip, from pin 1 to pin31, then you can take the signal from either.
If you DON't have a jumper on your kickstart chip, use pin31 for the high order address line.
Let me know if you have any other problems, or something isn't clear.
It's been quite a while since I built it, so I'll probably be a bit rusty with the info.
Cheers,
Red
