BlizKick with OS3.9

[x56h34]

Make sure that your maprom jumper from the B1260 card is removed (open). IIRC from your previous posts, you have a B1260.

If you are trying to create a single-reboot system, make sure that the extracted modules are from BB2 rom update. You only said "rom update" so you could be talking about BB1... I don't know, only speculating. :-)

Finally, here's an example of a BlizKick line designed for a single reboot and all or most of the relevant modules active:

Blizkick * EXTRESBUF=150000 HOGWAITBLIT SpeedROM MODULE Bblank NewAlert ROMFIXES Noclick MoveVBR FixMath404 MuMove4k scsi.device FastFileSystem Filesystem.Resource console.device Ram-Handler romupdate.idtag shell Bootmenu QUIET

SetPatch NOROMUPDATE QUIET

[x56h34]

These modules should come out from the rom update and be placed into the DEVS:Modules directory, together with the rest of the regular BlizKick modules:

scsi.device
FastFileSystem
Filesystem.Resource
console.device
Ram-Handler
romupdate.idtag
shell
Bootmenu

Assuming that you've installed the Rom Update from BB2, when the installer asked you to during BB2 installation, all you need to type from shell is the following:

romupdatesplit "devs:AmigaOS ROM Update" to devs:modules

...and the above-mentioned modules will be extracted from the BB2 Rom Update straight into the BlizKick's default modules dir.