Welcome, Guest. Please login or register.

Author Topic: 4000t CSMKIII 060 question  (Read 2010 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mpiva

  • Sr. Member
  • ****
  • Join Date: Aug 2003
  • Posts: 297
    • Show all replies
    • http://members.shaw.ca/michpiva
Re: 4000t CSMKIII 060 question
« on: November 20, 2006, 05:15:10 AM »
I have a CSMkIII in my A4000T.  No problems here.  At one time my system would GURU once on every cold boot and then reboot fine.  I think I solved that by adjusting the settings of the Cyberstorm's SCSI controller (in the end I completely disabled the A4000T's built-in SCSI controller as I wasn't using it anyway and having it on slowed boot times.  Is your hard drive on the CS's SCSI, the A4000T's SCSI, or the A4000T's IDE?  Try disabling the ones you're not using and see if that helps.

There's also some ROM settings in the CS's BIOS menu.  I think there may be a rom2fast type setting in there (but I'm not sure).  Anyway, try playing around with those settings and see  if you get any better luck.
-- Michael A. Piva --


"In engineering, there is no single truth, no one right answer; there\'s a canvas, and you paint it your way, only with chips or gates or subroutines rather than actual paint. That\'s the Amiga..."
-Dave Haynie
 

Offline mpiva

  • Sr. Member
  • ****
  • Join Date: Aug 2003
  • Posts: 297
    • Show all replies
    • http://members.shaw.ca/michpiva
Re: 4000t CSMKIII 060 question
« Reply #1 on: November 20, 2006, 04:32:42 PM »
Quote

amesie2 wrote:
How do I get into the CS bios settings? I have been trying to figure this out for a while.

Thanx for the reply


Hold down ESC when you turn the computer on.
-- Michael A. Piva --


"In engineering, there is no single truth, no one right answer; there\'s a canvas, and you paint it your way, only with chips or gates or subroutines rather than actual paint. That\'s the Amiga..."
-Dave Haynie
 

Offline mpiva

  • Sr. Member
  • ****
  • Join Date: Aug 2003
  • Posts: 297
    • Show all replies
    • http://members.shaw.ca/michpiva
Re: 4000t CSMKIII 060 question
« Reply #2 on: November 21, 2006, 05:39:40 AM »
Hmmm...  Not sure why that wouldn't work.  The only thing I can think of is try applying the latest Flash updates.  If you have the latest libs and the flash updates and ESC still won't bring up the CS's BIOS menu, then I think it must be a hardware problem.
-- Michael A. Piva --


"In engineering, there is no single truth, no one right answer; there\'s a canvas, and you paint it your way, only with chips or gates or subroutines rather than actual paint. That\'s the Amiga..."
-Dave Haynie