FS: Amiga hardware

[doctorq]

Unless otherwise statet, the items are tested and fully working...

TekMagic 2060, accelerator for Amiga 2000, Fast SCSI-II controller, 4 x 72 pins sockets, comes with 64 MMB ram (4 x 16 MB 72 pins ram). More info here
Will be on ebay shortly

MTec T630, accelerator for Amiga 600 with 68030@40 MHz and 8 MB ram. Board can be disabled by jumper. Original manual included.
More info here
Will be on ebay shortly

VXL 030 with RAM-32 ram board. 68030 for A500, A2000, CDTV. Installs in the CPU socket. 68000 CPU installed, as well as MC68EC30@25 MHz and 68882@40 MHz. 2 MB ram installed on RAM-32 board, can be upgraded to 8 MB.
The board has one broken leg, which has been fixed by adding a additional CPU socket, and routing the broken leg to the CPU socket by a wire.
The additional socket might need to be removed in order to install in A500, in order for the case and keyboard to close.
More info here and here
Price: SOLD

Blizzard 1260 with Blizzard SCSI kit for Amiga 1200. Comes with 2 x 16 MB, up to 256 MB possible.
More info here and here
Price: SOLD

Prometheus PCI board for Z3 Amigas
More info here   
Will be on ebay shortly

CV64 gaphics card for Z3, 4 MB ram            
More info here
Will be on ebay shortly

CV64/3D for Z2 and Z3, 4 MB ram            
SOLD!

X-Surf ethernet card for Z3 and Z3            
More info here
Will be on ebay shortly

2 x A1200 motherboard, Kickstart 3.1            
Will be on ebay shortly

Micronik 6860 rev 4.02 zorro II busboard for Amiga 1200
More info here
Will be on ebay shortly

Micronik 6860 rev 6.6 zorro II/III busboard for Amiga 1200, with SCSI controller
More info here
Will be on ebay shortly

13 x 3com PCMCIA ethernet card            
Will be on ebay shortly

WarpEngine 4028, accelerator for Amiga 3000 and 4000. SCSI and RAM not recognised when installed (warpdrive.device is found though), but otherwise the board is ok and works like an A3640 board.
More info here
Will be on ebay shortly

Amiga 4000 motherboard, Kickstart 3.1, socketed Buster 11, no CPU card and no RAM         
Will be on ebay shortly

Amiga 4000 PSU, complete and in good condition
Will be on ebay shortly

Amiga 4000 PSU, switch works but the rod is broken
Will be on ebay shortly

Amiga 4000 floppy drive               
Price: SOLD

[doctorq]

:bump:

[doctorq]

CV64/3D now sold.

[doctorq]

:bump:

PMs replied.

[doctorq]

:bump:

@rkauer

Chinon FB-357A drives.

[doctorq]

Floppy drive lot, all have been hooked up but doesn't appear to be working

Unless statet, without faceplate and eject button

1 ½ height drives
1 x Chinon FB-357A, with eject button, customize faceplate in 5.25" mounting plate
1 x Chinon FB-354, with eject button, customize faceplate in 5.25" mounting plate
1 x Chinon FB-357A with faceplate and eject button, missing LED
1 x Chinon FB-354 (with LED that can be transfered to the above drive)

1 height drives
1 x Chinon FZ-354
1 x Chinon FZ-357
2 x Chinon FZ-357A
1 x Teac FD-235F 4161
1 x Panasonic JU-256A276PC, with eject button
1 x Panasonic JU-257A606P, with faceplate and eject button, beige
2 x Panasonic JU-257A996P, with faceplate and eject button, dark grey

There is a hack on Aminet for converting Panasonic JU-257 drives to work with Amiga.

Best offer takes the lot, but shipping meight be expensive due to the weight of the drives.

[doctorq]

:bump:

[doctorq]

@koshman

No, the Premetheus is still available.

[doctorq]

:bump:

[doctorq]

@Gavilan

Sorry, no, I won't split the set.