Wanted: 68040!

[doctorq]

you usually need an 80mhz crystal for 40mhz operation.

Not for a WarpEngine, unless you want to try to run the CPU at 80 MHz.

[doctorq]

Kin-Hell wrote:

A 40Mhz Warp Engine uses an 80Mhz Crystal. ;-)

Check again.

[doctorq]

@Kin-Hell

You must have a special edition then. All pictures on the BBoAH as well as amiga.resource.cx has either a 28, 33 or 40 Mhz crystal for the CPU, and both of mine has either a 28 MHz (28.5363 to be precicesly) or a 40 MHz.

[doctorq]

CSMKIII is 80Mhz for a 40Mhz 040. Definately!  ;-)

No doubt about it, and so does the MKII, but this was about the WarpEngine :-)