Welcome, Guest. Please login or register.

Author Topic: Nalpalm  (Read 3322 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline doctorq

  • Hero Member
  • *****
  • Join Date: Aug 2003
  • Posts: 2082
    • Show all replies
Re: Nalpalm
« on: October 03, 2005, 06:03:01 PM »
BPPC cards have either a 68040 or 68060 CPU installed as well, so you will be getting an extra CPU if you get a BPPC. If you don't want to buy a BPPC card you can't use BVision, and then Mediator is your only option (almost). Then you can use the Voodoo cards you mention. As a third option, you can get a Zorro busboard for your Amiga, and connect a CyberVision card to it.
 

Offline doctorq

  • Hero Member
  • *****
  • Join Date: Aug 2003
  • Posts: 2082
    • Show all replies
Re: Nalpalm
« Reply #1 on: October 03, 2005, 06:09:16 PM »
It all depends on money. I would get a Mediator, Voodoo 3 3000 and a Blizzard PPC 060/240/SCSI, but the last one is quite pricy.

Forget the Voodoo 5 5500. You can only use 32 MB of the cards ram, and with Warp3D you will be limited to 8 MB because of zorro bus limitation, and both Voodoo 4 and 5 emulate Voodoo 3 (or what ever it is)
 

Offline doctorq

  • Hero Member
  • *****
  • Join Date: Aug 2003
  • Posts: 2082
    • Show all replies
Re: Nalpalm
« Reply #2 on: October 04, 2005, 08:55:21 AM »
@billchase

AFAIK the A1200 is zorro II; the only zorro III busboard you can get for an A1200 is the one from Micronik, and it requieres an A3000/A4000 accelerator installed to operate in zorro III mode.