BVision and BPPC!

[ryan2k1]

Yo y'all

I have a small problem. It seems that my BPPC board has a totaly smashed PPC unit.
Some legs of the cpu has even broken off the print..

It's to be said that i'm not gonna get the cpu repaired way too expensive.

Here is the real ?!!?
Do i need to have a fully functioning PPC Cpu to
use a BVision expansion?!
The reason why is that i have a bvision lying around but i can't get it to work, even with heavy cooling.

br.
Brian

[ryan2k1]

Yo!

I bought them both as secondhand, they was cheap i think. The price for them both was 142,- EUR
(603e 160mhz/040 25mhz) but they didn't work properly i'd got the 040 un'n running but the PPC cpu was crashing the system all the time.

So i tok the cooler of the chip and discovered that the legs was touching each ohter. In the effort to move them apart, one of the pins or more went of the print :-(
So now only the 040 works but would like to use my BVision, but only if posible.
Won't post anymore money into my acc board.

I Love AGA :-)

[ryan2k1]

Yo and thanks for all your help!
Just contacted amiga repair service (amiga.fr)
And i can't get my bppc fixed maybe i can get fixed at DCE but i dont think so, i will problely never get i back :-(

thanks again

[ryan2k1]

Yo just to end this post :-)

Got everything working, even with the leg's on the cpu bending :-/

However i just lowered the bus freq. to 50 mhz and then it works also my bvision :-)
I suspects that the heat from the cpu was expanding the legs on the cpu when clocked to 66 mhz.
However i have installed 5 coolers incl the ones on the PPC and BPCC. Also have i add power on the ppc board itself.

IT'S GREEEAT Amiduke here i come!

p.s:Internet explore looks soo dull!