Squirrel interface and CD-Rom how to Install?

[twizzle]

here is the procedure to fit a scsi squirrel cd & software.

switch off amiga connect scsi squirrel into pcmcia slot
plug into scsi cd.
the early type has a seperate pwr supply, later type is built in, switch on pwr, then switch on amiga.
insert software disc 1
it will then recognize your cd device a window will popup
showing your device in the right hand side click once & save,when finnished,it should have put a cdo icon in your sys/devices/drivers drawer it should also have named it CD2 OR CD3 , click once & choose info, in the tooltypes you will see UNIT=0 change this to 2 or 3 save,
then double click the cd icon to mount it.
put in your cd & you should see it on your wb screen (hopefully)
NOTE you have to have the scsi cd plugged in & switched on BEFORE you switch on the amiga.

hope this helps you out.
mike

[twizzle]

hi look at a4000 mad`s piccys,in the find device window you can see the scsi cd is listed No3  sony click once on it & save.
when finnished change CDO to CD3 save.
cd icon info tooltypes UNIT=0 change to UNIT=3 save.
you wont see a scsi cd icon permanly on your wb screen until you put a cd in , :-)

there is a CD0 icon in your scsi drawer this is for using CD32 games.
in disc 1 there are all the readme files needed to help you setup your device.

[twizzle]

hi, dont condem your scsi cd yet?
having had the same problem a few weeks ago,
i found that my scsi connector was faulty :-(
luckily i had a spare to try and my cd was then recognized
& now works :-)

 (hopefully my friend can repair the faulty 1)