Welcome, Guest. Please login or register.

Author Topic: Reattaching Suface-Mounted Resistors  (Read 2256 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline kgrach

  • Full Member
  • ***
  • Join Date: Jul 2003
  • Posts: 157
    • Show all replies
    • http://www.revanchellc.com
Re: Reattaching Suface-Mounted Resistors
« on: February 04, 2004, 04:00:47 AM »
Replace them. once the tab comes off the are done.

but cheer up resistors are dirt cheap pennies really. any electronics place can set you up with the two you need for less than a can of soda.
look at the numbers on the surface mount resistors. 473 = 47 plus three zeros 47000 or 47k Ohms.

5R4= 5.4 Ohms  simple really

buy a few extra when you get them because if you are not careful you could leach the tin right off the end of the resistors with your Iron and be right back where you started from.