Warning long post following.
he is What I did in my PPC/Mediator setup.
use at your own risk!!!
1. formatted HD with SFS .
2. Installed OS 3.9 onto HD
3. installed CDROM software from 3.9 install script
4. installed PowerPC software support Warp OS V5 from 3.9 install script selected Wshell Support&other GFX card from Question.
5. Installed BPPCFix from WarpUP archive. In the Startup-sequence before setpatch wrote C:BPPCFix Install >NIL:
Fixes nasty terminate message on starting desktop and is needed to prevent BB2 problems
6. Installed Boing Bag One & Two
7. Installed MUI 3.8 choose to install image sets & Example programs
8. Installed off of MM CD Mediator 2.9 system files,Enhanced Voodoo drivers,Warp 3d using supplied install script
9. Installed picasso96-2_1b using install script.
Choose Cybervison 64 3D as the graphic card.
Found the CVision3D and CVision3D.info in the DEVS:Monitors
drawer, renamed these files to Voodoo and Voodoo.info,
respectively.
Changed in the tool type window of the Voodoo.icon:
BOARDTYPE = from CVision3D to Voodoo.
Double Clicked on the Voodoo icon (in Devs:Monitors drawer).
Started the Picasso96Mode program (in SYS:Prefs drawer) and
selected
Attach setting to Board0: Voodoo.
Set up some screen modes 320X200,640X400,800X600,1024X768
Saved exited and rebooted Machine.
10.Installed mediator updates so all files match that of Mediator system files list on web Site confirmed to have all files and all up to date. Remember Make sure you have the A1200 version of Warp 3d installed not the A4000 version. MMCD installed the wrong ones for me.
List of Envarc settings:
Workbench:Prefs/Env-Archive/Warp3d/Mediator
Memsize 16 (largest size that works documentation say's to set to 23 don't work)
Workbench:Prefs/Env-Archive/Mediator
MMU No
NoCache No
VoodooInt Yes
VoodooMem 31 (some envarc say 31 one say's 63 )
Warp3D Yes (should this be set to yes or no)
Workbench:Prefs/Env-Archive/PowerPC
alertfile CON:0/20/400/200/WarpOS -
System Message/AUTO/CLOSE/WAIT/INACTIVE
crashfile CON:0/20/400/300/WarpOS -
PowerPC Exception/AUTO/CLOSE/WAIT/INACTIVE
debug 0
earlyterm 0
force 1
gfxaddr $200000
hidewarning 0
memprot 1
seginfo 100
terminator 2
Workbench:Prefs/Env-Archive/Picasso96
AmigaVideo 15khz
BlackSwitching No
Debug No
DirectColorMask No
DisableAmigaBlitter No
DoNotSetMMU No
EnableBootVGA No
Experimental Yes
PlanarOnlyDIPFDBUF No
PlanesToFast Yes
ShowModes ALL
Monitor Icon Settings
Workbench:Devs/Monitors/VooDoo
SettingsFile=SYS:Devs/Picasso96Settings
BOARDTYPE=Voodoo
BorderBlank=YES
DisplayChain=YES
FakeNativeModes=NO
FontsFix=NO
GrantDirectAccess=NO
IgnoreMask=Yes
MEMORYCLOCK=166
NoBlitter=NO
NoPlanar2ChunkyBlits=NO
OverClock=NO
BigSprite=NO
Quiet
SoftSprite=NO
System2ScreenBlits=YES
Tested W3DDEMOs ALL Worked
follow the above and all should work for you.
I havn't installed the New Update from yesterday yet.!!
Have fun.
Kgrach
