Help! Fresh OS3.9 install malfunctioning...

[kgrach]

you need the 68040New.libray and the 68040dummy.library renamed 68040.library from DCE or Phase 5.
rename the 68040.libray to 68040old.library

Does anybody know what happened to the DCE download site.
I tried to link there and it does not exist any more.

Ohh do yourself a big Favor and ditch FFS get SFS from aminet.

Besides being Faster and Safer you can no longer invalidate your hard drive.  It also is supported under 4.0
Yesterday I set up a hard drive on my A1200 System Using SFS. Made a mirror copy of my hard drive. Updated it to 4.0 stuck it in my AmigaOne and that was the one I showed AMUSE last night.

The reason I mirrored my A1200 HD. Was this way I could show my legacy programs running under OS 4.0 without have to install them all. Yes I was being lazy. But it worked!

[kgrach]

My setup is as follows.
A1200T,Phase 5 PPC 275Mhz 603+/60Mhz 68060,192MB RAM,Yamaha 2100 SCSI CDRW,Pioneer SCSI DVD, Seagate Baricuda SCSI HD 8.5G,IBM SCSI Ultrastar HD 73G,Mediator1200SX,Voodoo 5500,Abit AU-10 Sound Card,Spider USB,Win TV Card,8139 Ethernet Card,RAKA1200 Keyboard Adpater,RAMA mouse adapter,IDEKILL12,Septre 19.1"LCD Monitor. Logitech Cordless Keyboard and Trackman Marble.

To save you alot of nightmares with setting up 3.9  here is what I did

1. formatted HD with SFS .

2. Installed OS 3.9 onto HD

3. Before rebooting make sure you check the startup-sequence. Erase all that setpatch happy horse ####. This is what the begining of your Startup-sequence should look like

; $VER: Startup-Sequence_HardDrive 45.1 (25.11.00)
; Startup-Sequence for hard drive systems
C:BPPCFix install >NIL:
C:SetPatch SKIPROMUPDATES "scsi.device" QUIET
C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21


4. Make sure you have the DCE/Phase5 libraries installed

5. installed CDROM software  from 3.9 install script

6. installed PowerPC software support Warp OS V5 from 3.9 Install script selected Wshell Support & Bvision GFX card from Question.

7. Installed BPPCFix from WarpUP archive. In the Startup-sequence before setpatch wrote  C:BPPCFix Install >NIL:
     Fixes nasty terminate message on starting desktop and is needed to prevent BB2 problems

8. Installed Boing Bag One & Two ALWAYS MAKE SURE TO CHECK THE STARTUP-SEQUENCE SO THAT IT READS LIKE LINE 3 before rebooting.

[kgrach]

@RYU

Good question I had A GREX installed into this mess at one time.  I wonder What I did when I installed the mediator. Is there A way to check what version you have flashed?