Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: how to use a TFT screen with A500  (Read 2701 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Iggy_Drougge

  • Sr. Member
  • ****
  • Join Date: Jul 2003
  • Posts: 333
    • Show all replies
    • http://www.kristallpojken.org
Re: how to use a TFT screen with A500
« on: February 12, 2009, 05:47:54 PM »
Quote

skurk wrote:

Slightly longer answer: Yes, if you buy an external scandoubler, which is very expensive and almost impossible to find.  Skräckscenariot: One went for US $910 on eBay about a year ago.

Surely the zero shouldn't be there?
Logged
A4000/25MHz/64MB/20GB/RetinaBLTZ3/FastlaneZ3/CatweaselMKIII/Ariadne/A2301
A3000/40MHz/32MB/6GB/Merlin/Buddha/X-Surf/FrameMachineII+Prism24
Draco60/50MHz/128MB/15GB/Altais/DracoMotion/DV/IOblix+net
 

Offline Iggy_Drougge

  • Sr. Member
  • ****
  • Join Date: Jul 2003
  • Posts: 333
    • Show all replies
    • http://www.kristallpojken.org
Re: how to use a TFT screen with A500
« Reply #1 on: February 12, 2009, 09:40:31 PM »
Quote

skurk wrote:
I wish.  But no, the scandoubler went for a whopping US$910.

Well, anything can go for absurd amounts of money if two idiots with too much money bid on the same item. The typical price for a scandoubler from my horizon is below 100 €. Considering that it's always been possible to buy scandoublers for a bit above 100 €, those who bid 910 dollars for a used one have no sense at all.
Logged
A4000/25MHz/64MB/20GB/RetinaBLTZ3/FastlaneZ3/CatweaselMKIII/Ariadne/A2301
A3000/40MHz/32MB/6GB/Merlin/Buddha/X-Surf/FrameMachineII+Prism24
Draco60/50MHz/128MB/15GB/Altais/DracoMotion/DV/IOblix+net
 
Pages: [1]   Go Up
« previous next »