-M1230 XA Acelerator

[Drummerboy]

Hello,

Somebody know if this acelerator need change something for recognize the more than 16MB SIMM Modules?..
Or if you puy any SIMM ram module will recognize without any change the new SIMM Module..

I know theyre a Jumpers, i m not sure if need change something in the jumpers, or need any diferent software, becouse this card need "AUTOXA Driver" to recongnize the memory installed.
In the manual says this support to 128MB.--

Anybody has this Card too?

[Drummerboy]

Ok,

I am testing many SIMM Modules, but you know, some i dont know how much megabytes are.. but if i put in the card, all the times show as 16MB!.. its very rare!..

[Drummerboy]

I was lucky enough to find a 128mb simm for mine on ebay for like $8. YOu have tu use the SET XA ram utility unless you have 3.1 roms. Then the ram autoconigs.

What exactly does Set XA,  becouse i was runing, and can change the quantity Memory now show 32MB with any allegledy 16MB SIMM Module!!  :confused::confused: