Welcome, Guest. Please login or register.

Author Topic: Minimig Problem - Help!  (Read 2642 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline bonTopic starter

  • Newbie
  • *
  • Join Date: Jun 2003
  • Posts: 46
    • Show all replies
Minimig Problem - Help!
« on: January 12, 2008, 07:55:01 PM »
I just finished with the help of a friend of mine (who is really good in soldering) my minimig. I also bought a pre-programmed PIC from ebay and today started testing it.

I put kick.rom and minimig1.bin inside the SD card (2Gb Kingston Fat 16 Formatted) and plug the minimig on the monitor. The monitor shows it gets signal, blue and red leds light up on the minimig, and after a while the drive led (green) lights up too. I see however absolutely nothing on Screen. Pushing the "menu" button or F12, the minimig menu comes up, and it even lets me choose an .adf file from the SD card, reboot, everything! However it NEVER gets to the Amiga Kickstart Screen and of course loads no .adf file.... I have tried almost any ROM I could find with still no luck....

So any other Minimig owners/specialists out there I would really appreciate your help...
Jesus Saves! - The rest of you take full damage...
 

Offline bonTopic starter

  • Newbie
  • *
  • Join Date: Jun 2003
  • Posts: 46
    • Show all replies
Re: Minimig Problem - Help!
« Reply #1 on: January 12, 2008, 08:21:05 PM »
I have some kickstart files I use with WinUAE, and tested them all....
Jesus Saves! - The rest of you take full damage...
 

Offline bonTopic starter

  • Newbie
  • *
  • Join Date: Jun 2003
  • Posts: 46
    • Show all replies
Re: Minimig Problem - Help!
« Reply #2 on: January 12, 2008, 08:26:56 PM »
Of course I have renamed it to kick.rom .... I have also tried several different 1.3 ROMS...

Edit: Just for test reasons I used a working rom from another minimig so the problem is obviously NOT the Rom.... Ideas?
Jesus Saves! - The rest of you take full damage...
 

Offline bonTopic starter

  • Newbie
  • *
  • Join Date: Jun 2003
  • Posts: 46
    • Show all replies
Re: Minimig Problem - Help!
« Reply #3 on: January 12, 2008, 10:24:38 PM »
@freqmax you got a pm
Jesus Saves! - The rest of you take full damage...
 

Offline bonTopic starter

  • Newbie
  • *
  • Join Date: Jun 2003
  • Posts: 46
    • Show all replies
Re: Minimig Problem - Help!
« Reply #4 on: January 13, 2008, 01:07:47 PM »
First of all thank u for your answer Mark. Can u please tell me how can I "monitor the serial output from the PIC during boot" in windows Xp? Can u suggest a software to do this, cause I have not done such a thing before...
Jesus Saves! - The rest of you take full damage...
 

Offline bonTopic starter

  • Newbie
  • *
  • Join Date: Jun 2003
  • Posts: 46
    • Show all replies
Re: Minimig Problem - Help!
« Reply #5 on: January 13, 2008, 03:19:42 PM »
There u go... I have also sent this to Dennis...

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2008.01.13 17:15:10 =~=~=~=~=~=~=~=~=~=~=~=

Minimig Controller build 07-10-2007

by Dennis van Weeren
fatsize:240
fatno:2
fatstart:263
dirstart:743
direntrys:512
datastart:775
clustersize:64
MMC card found!
FPGA init is high
file found
FPGA bitstream file opened
***********************************************************
FPGA bitstream loaded
FPGA configured
loading kickstart
file found
...........................................................
kickstart loaded
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00................OK
00..............
Jesus Saves! - The rest of you take full damage...
 

Offline bonTopic starter

  • Newbie
  • *
  • Join Date: Jun 2003
  • Posts: 46
    • Show all replies
Re: Minimig Problem - Help!
« Reply #6 on: January 13, 2008, 03:35:27 PM »
Actual pics of it...

Picture 1 my minimig after having completed boot and picture 2 the only thing I can get to see onscreen...


Image 1

Image 2
Jesus Saves! - The rest of you take full damage...