RGB not syncing on Commodore 1084 Monitor [SOLVED]

[CaelThunderwing]

i just got in today a A500 Video RGB to 6Pin RGB cable i can see it in color but its not Syncing like Vhold or H-hold needs changing but the 1084 doesnt have any VC/H-hold knobs for adjusting :/

any way to correct this ? as i hope i didnt just waste 24$.

[CaelThunderwing]

Yea but only in greyscale

[CaelThunderwing]

yea it scrolls  its connected to the 6 pin plug i havent purchased a 8 pin adapter for the TTL RGB.

[CaelThunderwing]

should io try for another 6 pin or get the bpin TTL Cable like from here? https://www.vesalia.de/e_amigamonitorcables.htm

[CaelThunderwing]

thatd be a no on both ends sadly :/

[CaelThunderwing]

i think i do would i be looking for any feedback on the CSYNC Pin?

and if i haveto order a new cable the site i linked earlier and w/ the images i posted should i get one for the 8pin DIN or the 6pin DIN ?

EDIT: added pictures as attachments to make it easier, forgot that the iphone4 takes at such an image size.

[CaelThunderwing]

Whoa there big boy, try scaling those pictures down, or use the built-in forum tools to attach them to your post.  Makes 'em a lot easier for people to see. :lol:

If you don't have any other testing equipment, try testing the continuity of the six pins on the cable.  A basic multimeter can do that for you.  Make sure they're connecting to the right pins on the 23-pin connector.

 is there a wirediagram i can use to know which connects to witch on the 23pin side?

and if the amiga would only work w/ the 6pin DIN adapter whats the 8 pin TTL one for?

[CaelThunderwing]

edit: with teh pin fixed,  this has come back to life