Blizzard PPC Crisis

[Framiga]

Hi CU

have you switched-ON the rear switch of the PSU? (must be always ON)

What happens, when you put togheter the 2 "PowerON-ground" wires directly?

Ciao

[Framiga]

Hi CU_AMIGA,

. . .erm!! sorry but i haven't understood quite nothing :-)

The OLD PowerTower switch, had 4 wires . . .right?

In a AT PSU enviroment, it switch ON/OFF the 220 volts AT PSU.

Now you have an ATX PSU, right? with an ATX2AT adapter, right?

Are there 2 wires from the ATX-PSU (the PSU-ON ones), right?

So, only for testing pourpose . . . try to put togheter those 2 wires.

Ciao

[Framiga]

Can i use that method as a permenant setup?

not . . .but IF the PSU starts in those way, then you must search the 2 PowerTower switch wires (only 2 of 4) that close and open the circuit.

Connect those 2 wires and you'll have a right switch ON/OFF.

Probably, you have chosen the wrong ones. (check with a multimeter which ones open/close)

Ciao