SCART RGB Lead problem

[Framiga]

OK

What I have here connected

http://wiki.classicamiga.com/Amiga_RGB_to_Scart_lead

Scart

5, 7, 9, 11, 13, 15, 17, 18 and 20. 17 and 18 are connected with jumpwire

So need to figure out 5, 9, 13 what those are for / where they go (ground signals???) and cut jumpwire form 17 to 18. Get 12v to pin 16

D-sub is has all needed wires exept 22

pins 5-9-13 SCART side are the RGB ground signals thats must go to

pins 16-17-18 Amiga RGB connector side (actually it would be better to have single shielded mini-coaxial cables for R-G-B and CSync)

Keep as reference (resistors apart which your telly doesn't need) Jan's page

http://www.ianstedman.co.uk/Amiga/amiga_hacks/Amiga_SCART/amiga_scart.html

[Framiga]

beeing all GND grounds (SCART 5-9-13 and AmigaRGB 16-17-18), yes keep it as they are.