Welcome, Guest. Please login or register.

Author Topic: A2000 PSU blew up  (Read 3298 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Framiga

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 4096
    • Show all replies
Re: A2000 PSU blew up
« on: December 07, 2003, 10:41:10 AM »
Quote
by amiga2000 on 2003/12/7 11:16:43

The PSU to my Amiga 2000 just blew up again - that is twice in one year (after replacing it with another 300W PSU from Mr Hardware Computers). I was wondering, what does that mean? This time, after 'shutting down', I heard a pop sound and then a horrible burning smell...

you are very unluck :-)

300 watt PSU are enought to run a small car for children. :-)

Probably your new PSU has a problem in the shoutdown "very complex" component . . .a resistor.

If it is too low in OHM, this acts a stress on the big capacitors when it is trying to discharge them.

Now or replace it with an higher resistance one (PAY ATTENTION:only if you know what you are doing) or replace the PSU with a standard AT one.

Ciao

-edit- HERE you can find a lot of Amiga and ATX connectors pin assignment

http://www.hardwarebook.net/connector/