Bloodline wrote:
"'m always facinated how "blitter noise" seems to make it's way through the audio output of "integrated audio" solutions... The weird thing is that the noise is present even if the volume is turned down to 0... which leads me to think that if I could get some decent grounding I could reduce the noise too."
I agree . . . it is the second time . . :-)
Even on standalone solution like my RepulseGold card, i had some little noise related problem, when the card WAS installed in the original A4000D case.
I had fixed the problem, isolating physically the rear RepulseGold bracket from the case. (due probably to a ground loop).
No problem when i've changed to the PowerTower case.
Audio, is very hard to handle, from a hardware planning POV.
Ciao
