Welcome, Guest. Please login or register.

Author Topic: Deneb Zorro II/III DMA USB 2.0 controller available  (Read 9905 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Framiga

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 4096
    • Show all replies
Re: Deneb Zorro II/III DMA USB 2.0 controller available
« on: May 09, 2008, 02:38:19 PM »
i'm interested about the ethernet adapter too.

I will buy one for this reason.

And which model/brand USB eth adapter do you suggest?

Thanks for this interesting product :-)

Edit- btw ... just read these system requirements:

"compatible with AmigaOS 3.1, 3.5, 3.9 and 4.0 (PIO mode)"

Isn't MOS for PowerUP supported?
 

Offline Framiga

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 4096
    • Show all replies
Re: Deneb Zorro II/III DMA USB 2.0 controller available
« Reply #1 on: May 09, 2008, 03:41:51 PM »
fine then ... just found the answer:

"DENEB is available from now on directly at E3B and selected Amiga dealers.

Why is this relevant for MorphOS? Because the card also works under MorphOS PUP and can be used to boot MorphOS PUP directly from FlashRom."

but ... why this "bit" is skipped in the resellers sites Deneb description?
 

Offline Framiga

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 4096
    • Show all replies
Re: Deneb Zorro II/III DMA USB 2.0 controller available
« Reply #2 on: May 10, 2008, 01:52:17 PM »
no need to apologize! (Vesalia have the same info as yours)

it was only to understand! (btw i'm an AmigaOS3-AmigaOS4 and MOS for PowerUP user, actually)

Thanks!