Red then blue screen when booting OS4 Classic from CD

[Framiga]

i don't think is possible since the problem with the buffered interface, is during the installation.

It worth a try!

Anyway during the installation only the first channel is seen (ID0 and ID1).

[Framiga]

sorry for the OT but i have slowness accessing here to AORG
Can you please test if trying to access here with the IP works for you?

http://68.90.68.98/

thanks

ps i get the cPAnel saying

ATTENTION!

 If you are seeing this page instead of the site you expected, please contact the administrator of the site involved.

[Framiga]

ok thanks moto!

how are going your experiments! :-)

btw ... is your A1200 an Amiga Technologies a1200?

; Some A1200 from Amiga Technologies have a hardware problem.
; Or in fact some floppy drives designed for PCs have it.
; When disk.resource checks for the internal floppy drive it doesnt claim
; to be present. When you have such a model and you miss the DF0: device,
; uncomment the following line by removing the leading semicolon,
; then disk.resource will always report that DF0: exists and is a 3.5"
; drive when it could not be found.
;
;MODULE Kickstart/ATechA1200Fix

i don't think thats the problem, anyway interesting thread!

[Framiga]

"I don't know since it's in a tower. Is it shown on the mobo?"

unfortunately i never own an A1200 so i really don't know.

Better thing is to wait for the IDE adapter :-)

 

[Framiga]

use Scout for OS4 then! ;-) (is on Aminet)

[Framiga]

AmigaOS4 for classic have its own early ss screen.

[Framiga]

after a warm reboot from AOS4 (or right after the first reboot when you switchON the system).

[Framiga]

another couple of interesting OS4 classic features:

with CTRL+ALT+ALT you can cold reboot (useful to switch between different OSs)

and (as you have noticed) the CSPPC Early Boot Menu, is available only after a cold reboot.

Quite everything is ignored after OS4 kernel is loaded.

[Framiga]

you're welcome!