eFlash 4000 (2mb version) and OS 3.9

[Framiga]

Kristian95 wrote:
Ah, thanks for the tips on SpeedyIDE and SpeedyChip
I'll probably go for IDE-> SCSI adapter sometime... but first I need to have the SCSI CD-ROM working, I know that is noob stuff, but I never had a big box Amiga back in the day so this is a first for me, i.e. a little help will definately be appreciated. The CD-ROM drive is attached to my CSPPC SCSI controller and I have not been able to enter the early boot menu for the CSPPC .

first do in a shell  

version cybppc.device full

and report here (what GFX card you have?)

second ... while i know that an Acard SCSI to IDE adapter, "sounds" expensive, togheter to a cheap 52x ATA CDROM or CDRW , you will get the maximum speed without SCSI2 bottlenecking.

AEC-7720UW for CSPPC

[Framiga]

an Acard adapter for every device used and not, you don't need any special scsi cable.

Any Acard adapter carries good active termination also, hence you will need only one active terminator close to the CSPPC uwscsi connector.