X-Surf not recognized/recognized but not working

[Framiga]

x-surf.device must be lowercase

[Framiga]

does xsurftest respond? (without run AmiTCP)

Next step, contact Jens S.

AFAIK there are some rare issues, due XSurf autoconfig and ZIII cards.

[Framiga]

download the latest driver from Here

and read the doc about the Sana2 variable.

The installation CD is ~ 8MB in size. Contact me privately, if you want it as ISO.

[Framiga]

sent

[Framiga]

no good! tryed in another Zorro slot? reseat the PLCC chip? cleaning contacts?

You should get about like this:

5/0.MOS:C> xsurftest
xsurf testprg V1.2 (13.12.1999)

Searching for xsurf card (VEN_ID=4626, PROD_ID=23)....found
Board address = 0xea0000

ISA Plug and Pray [ähm] Play setup...
01-CARD VendorID = 0x19808c4a SerNr=0x15eb CRC==x54
Setup PNP card...

Searching for RTL8019 at 0x300...found!
Testing 16bit memory...ok!
Ethernet address =  0:c0::b0::14
Chip is in PnP mode
Chip is using half-duplex mode
Chip is using IOBase 0x300 and IRQ 3  

IRQ / Loopback / cable connection test in progress:
IRQ received ok.
Packet send......via TP!