Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: PPC problems  (Read 1526 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Framiga

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 4096
    • Show all replies
Re: PPC problems
« on: October 31, 2005, 01:39:45 PM »
its a BlizzardPPC or?
Logged
 

Offline Framiga

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 4096
    • Show all replies
Re: PPC problems
« Reply #1 on: October 31, 2005, 02:08:53 PM »
its difficult to say!

Have you already tryed to clean the edge connector and/or try to fit the BPPC NOT fully inserted? (1-2 mm out)

EDIT- ah . . which PSU are you using? and would be better to test it on another A1200. (before sending it for repairs)



Logged
 

Offline Framiga

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 4096
    • Show all replies
Re: PPC problems
« Reply #2 on: October 31, 2005, 04:26:18 PM »
it "seems" a lack of power on the +5volt rail. (worse with the 64MB module)

The last test you can do, is to feed the +5 volt and GND directly from the PSU to the CPU fan socket.

But honestly, i prefer that someone else (who has already done it) could confirm this "dirty hack" :-)

Logged
 

Offline Framiga

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 4096
    • Show all replies
Re: PPC problems
« Reply #3 on: October 31, 2005, 05:44:23 PM »
ah yes for sure!

That dirty (yes because it is) hack, will generate a ground loop at least (if not worse without an appropriate circuit).

In most of the cases, it will work but . .

Logged
 
Pages: [1]   Go Up
« previous next »