One for 680x0 experts - move16 issues...

[Framiga]

in Piru NewCMQ060 archive readme, thats something about 040 move16 bug.

[Framiga]

none here . . . i have CMQ060Move16 installed.

Do you want the output?

CVPPC 1024x768 16bit CGX 4.3 68060

[Framiga]

10/0.AmigaOS:> "Ram Disk:pixeltest"
Surface width: 640, height: 480, modulus: 0

Surface hwWidth: 640, hwHeight: 480
Test data pixel format

Bytes   : 2, endian native
Bits    : A[  0] R[  5] G[  6] B[  5]
Offsets : A[  0] R[ 11] G[  5] B[  0]
Maxima  : A[  0] R[ 31] G[ 63] B[ 31]

Window pixel format

Bytes   : 2, endian native
Bits    : A[  0] R[  5] G[  6] B[  5]
Offsets : A[  0] R[ 11] G[  5] B[  0]
Maxima  : A[  0] R[ 31] G[ 63] B[ 31]

Results (negative value indicates glitches were observed

Read RAM      : 58624.13 K/sec
Write RAM     : 45418.33 K/sec
Write RAM(C)  : 33136.09 K/sec
Write RAM(16) : 36941.41 K/sec
RAM->RAM      : 27755.91 K/sec
RAM->RAM(C)   : 15264.19 K/sec
RAM->RAM(OS)  : 33201.58 K/sec
RAM->RAM(16)  : 32738.10 K/sec

-------------------------------

Read VRAM     : 6094.18 K/sec
Write VRAM    : 23460.41 K/sec
Write VRAM(C) : 5813.95 K/sec
Write VRAM(16): 16617.21 K/sec
RAM->VRAM     : 16568.05 K/sec
RAM->VRAM(C)  : 5273.44 K/sec
RAM->VRAM(OS) : 15774.65 K/sec
RAM->VRAM(16) : 16000.00 K/sec
RAM->VRAM(SC0): 12903.23 K/sec
RAM->VRAM(SC2): 11952.15 K/sec
RAM->VRAM(SC4): 12928.42 K/sec
RAM->VRAM(SC6): 11834.20 K/sec
RAM->VRAM(SC8): 12877.88 K/sec
RAM->VRAM(swp): 11583.01 K/sec

-------------------------------

VRAM->RAM     : 5157.59 K/sec
VRAM->RAM(16) : 5853.66 K/sec

-------------------------------

Conversion    : 16617.21 K/sec [output bandwidth]
Conversion    : 8508011.87 pix/sec

Conversion attained  100.30% copy speed

[Framiga]

8/0.AmigaOS:> "Ram Disk:pixeltest/pixeltest" lock
Surface width: 640, height: 480, modulus: 0

Surface hwWidth: 640, hwHeight: 480
Test data pixel format

Bytes   : 2, endian native
Bits    : A[  0] R[  5] G[  6] B[  5]
Offsets : A[  0] R[ 11] G[  5] B[  0]
Maxima  : A[  0] R[ 31] G[ 63] B[ 31]

Window pixel format

Bytes   : 2, endian native
Bits    : A[  0] R[  5] G[  6] B[  5]
Offsets : A[  0] R[ 11] G[  5] B[  0]
Maxima  : A[  0] R[ 31] G[ 63] B[ 31]


Locking enabled. No task switches or interrupts during iterations.

68040/060 detected. MOVE16 based tests will be performed.
Results (negative value indicates glitches were observed

Read RAM      : 57380.75 K/sec
Write RAM     : 45855.11 K/sec
Write RAM(C)  : 33108.27 K/sec
Write RAM(16) : 52591.97 K/sec
RAM->RAM      : 27757.65 K/sec
RAM->RAM(C)   : 15544.19 K/sec
RAM->RAM(OS)  : 32728.97 K/sec
RAM->RAM(16)  : 32656.29 K/sec

-------------------------------

Read VRAM     : 6408.90 K/sec
Write VRAM    : 23131.52 K/sec
Write VRAM(C) : 6307.71 K/sec
Write VRAM(16): 19469.71 K/sec
RAM->VRAM     : 16668.71 K/sec
RAM->VRAM(C)  : 6022.64 K/sec
RAM->VRAM(OS) : 15999.47 K/sec
RAM->VRAM(16) : 15976.67 K/sec
RAM->VRAM(SC0): 12945.05 K/sec
RAM->VRAM(SC2): 11964.15 K/sec
RAM->VRAM(SC4): 12944.53 K/sec
RAM->VRAM(SC6): 11968.74 K/sec
RAM->VRAM(SC8): 12936.73 K/sec

-------------------------------

VRAM->RAM     : 5970.79 K/sec
VRAM->RAM(16) : 6512.34 K/sec

-------------------------------

Conversion    : 16668.29 K/sec [output bandwidth]
Conversion    : 8534163.20 pix/sec

Conversion attained  100.00% copy speed

[Framiga]

forgot to mention . . .mine is a

68060 @ 60 Mhz (ram settings>60ns)

CVPPC @ 92 Mhz (Permedia active cooled)

My CSPPC its a very early 604e 150 Mhz OC at 200 Mhz. (the model with NO RAM Precharge settings enabled)

EDIT- and remember that there are 2 different models of CVPPC, that uses different VRAM chips.

[Framiga]

to be honest .  . .not so much :-)

Some benchmarks here and there but for the everyday use . . .  i don't see it.

Another note . . .due my very old IIyama 21", i'm forced to use rather low frequencies rates (about 50Khz horizontal and 65 Hz vertical)

For the above reason, i think that my P2 is running very very . . . . quite (don't know if the exact definition)

[Framiga]

unfortunately 1024x768 16 bit here :-(

1120x900 only for ProStationAudio . . . as i said, its a very, very old chaps :-(

Idek IIYama MF5121 (2 identical monitors, give me as a gift by a relative of mine).

They were used on a sort of "custom printing workstation", in 1990.

I know . . .time to replace them but . . . no money now for at least a 19" (21" monitor addiction)

[Framiga]

oh, just for curiosity.

Would be possible, to write (you obviously) sort of AvailP96 thing for CGX?

Would be useful . . or not? :-)

EDIT- i've already an "very original, unique" name in mind . . . AvailCGX . . . :-D

[Framiga]

:-D

ah OK . . . so no royalties for me!

OK anyway :-)