DPS TBC IV problems

[videofx]

I have my camera Svideo OUT going into the TBC IV Svideo IN and the TBC IV Svideo OUT going to my monitor.

When I load the software and select TBC 1 ( Thats what I have the dip switches set to) and change any of the sliders nothing happens. I do the same for TBC 2, 3  and 4 in case the address is wrong and nothing changes.

Does anyone know how to use this card?

Thanks

[videofx]

Thanks, thats the problem. I have to find the 9 pin to 25 ping serial cable.

[videofx]

I thought the same thing but the Mac serial 8 pin DIN is different than the 9 pin mini din that the TBC uses.

[videofx]

I found my RC-2000 and connected to the TBC and everything is working.

thanks

[videofx]

I found the RC-2000 cable in my stash so all I need is an RJ-14 to DB25 female and I can make my own cable. So I will order the connector tomorrow and build my own cable. The TBC is simple. It only use 3 pins, Send, Receive and ground. So will be simple to make.