Welcome, Guest. Please login or register.

Author Topic: A2k won't boot  (Read 1973 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Linchpin

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 1483
    • Show all replies
    • http://www.systemmedic.co.uk
Re: A2k won't boot
« on: June 07, 2005, 04:24:01 PM »
Red can also be caused by IDE issues iirc... at least on the A1200 it can.

I take it, the amiga has a HDD? Or are you connecting mobo only?

Kev
WinUAE Only... OS3.9 with 512mb ZIII ram ;)
 

Offline Linchpin

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 1483
    • Show all replies
    • http://www.systemmedic.co.uk
Re: A2k won't boot
« Reply #1 on: June 07, 2005, 10:43:21 PM »
Not too sure about the a2k.. but the a500 can flash out error codes on the Caps Lock LED?

What does the power light do? Does it dim? (Im thinking a500 here... but i guess the "flagship" is the same :)
WinUAE Only... OS3.9 with 512mb ZIII ram ;)
 

Offline Linchpin

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 1483
    • Show all replies
    • http://www.systemmedic.co.uk
Re: A2k won't boot
« Reply #2 on: June 07, 2005, 10:47:11 PM »
... and to add.

If the Amiga caps lock key LED blinks repeatedly at boot up, another series of error messages must be consulted:
one blink . keyboard ROM checksum error
two blinks .. RAM failure
three blinks .. watchdog timer failure
and not part of the official specification, but observed by the keeper of this page:
on the A500, multiple repeated blinks indicate low voltage on the 5-volt line from the Amiga 500 power supply.

Take from > http://www.nyx.net/~rdavis/AmigaHints2.html

Kev
WinUAE Only... OS3.9 with 512mb ZIII ram ;)