QuickJoy JetFighter sv 126 problem

[S0nic]

i get today this joystick look very good, i try it on my a500 he go up-down left-right normal , but he don't fire on booth button eaven they are clicking normal and look good not broken , does anyone have some idea where is problem

[S0nic]

You could clean the contacts with some alcohol that might do the trick, well atleast its worth a try

you mean contacts on pin's on joystick?

i try another joystick and work fine on my amiga and c64 so can try to clean only pin's on joystick...

[S0nic]

It was common for the wires to rip on these things.
Find someone who is good at soldering (perhaps another Amiga user?)
and have them unscrew it and check the wires haven't come loose.

wires in cable or wires into joystick?

[S0nic]

The wires inside the joystick. It is probably quite delicate inside. Only open it if you have done it before.
There are wires that go from the fire button to the bottom of the joystick. They connect to a circuit board before going to the cable. (Where the cable comes out of the joystick).
One those wires has probably broken loose.

i do somethinkg like that and now it's working i'm not 100% sure whee problem was , but now it's working .. i move autofire button and wires and joystick start to fire :ak47: