Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Gotek USB and compatability  (Read 1114 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline UberFreak

  • Full Member
  • ***
  • Join Date: Nov 2012
  • Posts: 148
    • Show all replies
Re: Gotek USB and compatability
« on: February 03, 2016, 02:39:57 PM »
Which FW are you using?

The non-HXC firmware ("cortex") is abandoned for nearly 2 years now, so dont expect any fixes. It is somewhat buggy, but works ok for most cases.

As for DF0/1 - that is selectable via a jumper on the Gotek.
Logged
 

Offline UberFreak

  • Full Member
  • ***
  • Join Date: Nov 2012
  • Posts: 148
    • Show all replies
Re: Gotek USB and compatability
« Reply #1 on: February 03, 2016, 03:09:27 PM »
https://www.youtube.com/watch?v=sRJ6jFWbB-k

This is how the hxc file selector looks like. If you dont see that, you have the other firmware.

Since you managed to boot some games, I would assume the drive is configured as DF0.
Logged
 

Offline UberFreak

  • Full Member
  • ***
  • Join Date: Nov 2012
  • Posts: 148
    • Show all replies
Re: Gotek USB and compatability
« Reply #2 on: February 03, 2016, 05:00:29 PM »
The video shows the hxc disk-image selector software which loads when you boot the Amiga with the Gotek on position "000".
Each firmware works with its own selector software.
Logged
 
Pages: [1]   Go Up
« previous next »