Author Topic: Wanted 8372A Agnus chip and 5×44256 RAM chips (Read 2526 times)

Oldsmobile_Mike · « **on:** October 17, 2015, 03:22:42 PM »

You want one of the 8372 variants. Probably 8372A. 8375 is only for very late model (Rev.

A500 boards (and A600, etc.), unless you're using a Megachip adapter or something like that. Look up the Wikipedia article on Agnus, there's a couple other good resources out there.

Oldsmobile_Mike · « **Reply #1 on:** October 18, 2015, 01:04:10 AM »

I don't understand your posts. What revision motherboard do you have currently and what Agnus is installed? You may already have one that supports 1MB.

Edit: look on the chart on Wikipedia or any of the other sources. Without looking myself I'm about 99% certain 8371 and 8375 are not pin-compatible. You can't just replace one with the other. You need an 8372A. (unless you want to rewire one of the sockets)

Oldsmobile_Mike · « **Reply #2 on:** October 18, 2015, 03:23:18 AM »

Quote from: Blizzard 128 MB;797585

Read all of the topic.

That's a snarky response to someone who's trying to help you. Learn English and come back when you can clearly word your questions. Bye! :griping:

Author Topic: Wanted 8372A Agnus chip and 5×44256 RAM chips (Read 2526 times)

Oldsmobile_Mike

Re: Wanted 8372A Agnus chip and 5×44256 RAM chips

Oldsmobile_Mike

Re: Wanted 8372A Agnus chip and 5×44256 RAM chips

Oldsmobile_Mike

Re: Wanted 8372A Agnus chip and 5×44256 RAM chips